For the case, that someone finds the time and has the knowledge to fix I hope my descriptions and these files can help to improve this fine software : For comparison output of 'dvbv5-scan', 'scan' and (essentially using audio pids as produced by 'scan') Astra_S19E2_12363kHz_nf: Manual corrected channel file Astra_S19E2_12363kHz_nf: 'dvbv5-scan' output for this Astra-19.2E-12363000: Scan input file in v5-format for this transponder I am not able to deliver the perfect patch instantly :-( I have taken a short look into the source code, but - so far -, sorry, Is not "a big thing", I only report this, because I have observed it and do notīelieve that this behaviour was intended. Using 'dvbv5-scan -I channel ' or 'dvbv5-scan -input-format=channel' producesĭuplicate entries when it finds a service on the same transponder. The appropriate audio-pid (seems to be exchanged randomly)!ĭuplicates output in connection with 'channel'-format: Shows that the software does find the service names but cannot assign correctly Comparing serveral scans done with 'dvbv5-scan' on this transponder Separate the multiplex, 'w_scan' only produces one service with serveral audio Special transponder (no tv, only radio and some data) only 'scan' does correctly In most cases 'dvbv5-scan' does a better job than the other tools, but on this Of the 'dvb-apps-1.1.2' package and with 'w_scan' (version ). nf-format and compared it with the output of the 'scan' utility Scan process with this utility, converted it to the older (more compact) Solely tuning via 'dvbv5-zap' I soon noticed, that the station (service) namesĪnd the AUDIO_PIDs generated with 'dvbv5-scan' are not correct. To time (BBC Word Service, Radio Nova - during night the "Le Grande Mix"). On this transponder are some satellite radio stations I am listening from time Wrong service/audio-pid output on Astra 19.2° East,transponder 12363000 Hz: With the 'dvbv5-zap' utility between DVB-T/T2 and DVB-S/S2 (very nice!). Thanks to the improved 'nf'-format, it is possible to use only oneĬhannels file for the different standards and switch the TBS-5520 directly (with the one restriction, that this German variant "DVB-T2 HD", which isĭVB-T2+HEVC/h.265, needs a lot/far too much resources). The result: DVB-T/T2 and DVB-S/S2 are working fine To do the tuning part with 'dvbv5-zap' utility and playback the stream via the Statement, because there is no functioning cable input available). Works only vor DVB-T and DVB-S/S2 (concerning DVB-C/C2 I can not make any Has a internal tuning facility (done via mplayer dvb://.) but - so far - this (without skin or other graphical toolkit). For DVB television and radio decoding I am using MPlayer Transmissions for terrestrial TV here in Germany I invested in some new hardwareĪnd played around. ![]() This software package (due to new hardware) a lot and I want to help improve it.ĭue to the (in my opinion bad) decision to switch from DVB-T to DVB-T2 This open-source software! The reason I am writing this bug report is that I use Produces duplicate entries in connection with 'channel'įirstly, thanks for all your work and time you have spent to create and maintain (compiled on my non-standart Slax/Slackware GNU/Linux 3.19.8)Įrrors on Astra 19E2 12363000Hz transponder (details below) You'll always have to edit these files in order to get them on DVD.1.1 Notebook: Lenovo ThinkPad 11e, Intel Celeron N2940ġ.2 Frontend: TurboView TBS-5520 Multi-standard TV Tuner USB Box But as far as I know, all DVB programs will only dump the raw. Remember that your custom package will be overwritten each time you update your system and a new version of Mplayer is available.Īs an alternative, you could try Me-TV (in community repo). If everything looks good, try tuning to a channel with mplayer. If all went well, install the freshly built package with "pacman -U Don't forget the "-e" or the changes you just made are lost again.ħ. In the mplayer package directory (containing the PKGBUILD), do a "makepkg -e" to build the package. Open the file stream_dvb.c, and change in line 765: "frontend0" to "frontend1". Go to line 131 and change "demux0" to "demux1". Go to lines 88, 89, 90 and change the device names from "frontend0", "demux0" and "dvr0" to "frontend1", "demux1" and "dvr1".Ĥ. Locate the file dvb_tune.c (in src/mplayer/stream), open it in a text editor.ģ. Change into the mplayer package directory in ABS (/var/abs/x86_64/extra/mplayer in my case), get the sources and extract them with "makepkg -o"Ģ. ![]() O.K., small step-by-step list of instructions:ġ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |